Multimeter Loop Multifunction Tester - UNI-T

Insulation resistance:
- Test voltages: 250V/500V/1000V: +-10%
- 250V: 0.05MOhm-250Mohm; +-(5%+5)
- 500V: 0.05MOhm-500Mohm; +-(5%+5)
- 1000V: 0.05MOhm-1000Mohm; +-(5%+5)
- Short circuit current: <2mA

Low resistance continuity test (Ohm):
- Range: 0.00 Ohm-199Ohm; +-(2%+5)
- Test current: 0.00-2Ohm. >200mA

Line impedance:
- Range: 0.01Ohm-2000Ohm; +-(5%+5)
- Operating voltage (freq.): 195V-440V(45Hz-65Hz)
- Test current: 20A
- PFC range: 0KA -26KA

Loop impedance:
- Range: 0.01Ohm-2000Ohm; +-(5%+5)
- Operating voltage (freq.): 195V-253V(45Hz-65Hz)
- Test current: 20A
- PFC range: 0KA -26KA

Low impedance travel (Ohm):
- Range: 1.00Ohm-2000Ohm; +-(5%+5)
- Operating voltage (freq.): 195V-253V(45Hz-65Hz)
- Test current: 15mA
- PFC range: 0KA -26KA

RCD:
- Operating voltage (freq.): 195V-253V(45Hz-65Hz)
- Test current: 10mA-30mA-100mA -300mA-500mA; +-10%
- Transit time: range x1/2 *1n: 0ms-2000ms; +-(5%+5) / x1*1n: 0ms-300ms; +-(5%+5) / x1*1n: 0ms-500ms / +-(5%+5) (countdown selectable) /x2 *1n: 0ms-300ms / x2*1n: 0ms-500ms (countdown selectable ) / x5*1n: 0ms-40ms /+-(5%+5)

Phase sequence test:
- Operating voltage (freq.): 100V-440V (45Hz-65Hz)
- Indication: order (L1-L2-L3 positive); change (L1-L3-L2 to inverter)

Measurement RAMP slope RCD:
- Test current range: 10mA-30mA-100mA-300mA-500mA; +-10%

AC voltage (V):
- Range: 0V-440V; +-(5%+2)
- Frequency response: 45Hz-60Hz
- Resolution: 1V

Functions:
- Max display .: 9999
- Auto power off
- Low battery indication
- Data log
- Backlit display
- Half-auto test wave
- RCD countdown measurement: 30 seconds
- Half-wave RCD test
- Phase switch (RCD): 0º and 180º

General characteristics:
- Power: 6 batteries (LR6) 1.5V
- LCD size: 125mmx37mm
- Product color: red and grey
- Standard accessories: batteries, test leads (1 green, 1 black, 1 red), specialized test lead, remote control

- Dimensions: 210 x 175 x 90mm