RAPID PLA+ 3D Printing Filament 1.75mm 1Kg (Yellow) - ELEGOO

Designed for Fast Printing
RAPID PLA+ filament has a dimensional accuracy of +/- 0.02mm and a strict tolerance of 1.75mm in diameter, which ensures smooth and consistent filament flow, reducing the risk of nozzle clogging.
By optimizing the material´s molecules and balancing its properties, the filament is able to quickly absorb heat and melt quickly, allowing for smooth extrusion and resulting in uniform, consistent prints every time, even at a fast print speed of 250mm/s

Less tangle and well coiled
All filaments are mechanically wound with a secondary winder and strict manual inspection to ensure the threads are neatly arranged on the spools, reducing tangles and potential breakage.
Made from renewable resources, our filament is safe, environmentally friendly and biodegradable, making it a sustainable choice for all your printing needs. For an even more environmentally friendly option, all filaments come on cardboard spools that degrade faster than plastic spools. Furthermore, the coils have three holes to observe the remaining filament amount and replace it in time.

Widely Compatible
All RAPID PLA+ filaments are vacuum sealed with desiccant to prevent moisture and dust, and are compatible with most 1.75mm FDM 3D printers, ensuring you can use them with confidence in your current printers.

Features
Density: 1.20 g/cm³
Melt index: 8.2 (190°C/2.16kg) g/10min
Tensile strength (X-Y): = 60 MPa
Elongation at break (X-Y): 19%
Flexural strength: 80 MPa
Flexural modulus: 2680 MPa
Charpy impact resistance: 3.85 kj/m²
Thermal deformation temperature: 53°C (0.45 MPa)
Fan: 100%
Line length: (1.75mm) 330-335m
Rockwell hardness: 88
Printing layer thickness: 0.2mm
Recommended extrusion/nozzle temperature: 200~230°C (recommended 220°C)
Recommended heated bed temperature: 40-60°C
Printing speed: 30-600mm/s
Recommended Platforms: PEI Board/Glass/Fiberglass Board/PEI + PVP Glue or platform spray

Main features: Compared to PLA, it is suitable for both high and low speed printing, being less prone to lint formation during high speed printing, with better results in overhangs and bridges. When the same force is applied, the deformation is smaller than that of PLA.